Sanding followed by more sanding then some sanding .
The previous owner had painted the boat with some crappy house paint in various shades of green and creme . Getting the green paint off from the corners inside the beams took some serious effort .
3 coats of Norglass Shipshape epoxy primer undercoat and 2 coats of Norglass Northane polyurethane gloss applied up to the deck . One coat on one side of the hull took 600ml of paint . The paint was overlapped so the keel will end up with 10 coats of paint .
Ah nice round edges should be allot less drag than those flat stainless plates
No comments:
Post a Comment